 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| COMMUNICATIONS MODULES & SUBSYSTEMS 10GBASE-LR XFP Optical Transceiver JXP Series Key Features * 1310 nm * Compliant at 10.31 Gb/s (Ethernet) and 10.52 Gb/s (Fibre Channel) * Positive power supply operation (3.3 V, 5.0 V) * Typical power dissipation of 2.0 W * Power-down capability to less than 50 mW * Digital Diagnostic Monitoring (DDM) support * No reference clock required * XFI AC-coupled electrical interface * XFI loopback implemented * Integrated electrical equalization on transceiver transmit side * Integrated Clock and Data Recovery (CDR) for receive and transmit data path * Bail latch for easy removal Applications * Storage Area Networks (SAN) * Local Area Networks (LAN) * Ethernet switches and applications * Fibre channel switches and applications * Client/Server environments * Bit error rate <10-12 * RoHS with lead in solder exemption The JDSU 10 Gb/s 1310 nm Optical XFP Transceiver is an integrated fiberoptic transceiver that provides a high-speed serial link at signaling rates from 9.95 Gb/s to 11.10 Gb/s. The module complies with the IEEE 802.3ae 10GBASE-LR standard, the 10GFC standard, and the 10 Gigabit Small Form Factor Pluggable (XFP) Multi-Source Agreement (MSA). The 10 Gb/s 1310nm Optical XFP Transceiver integrates the receive and transmit paths in one package. On the transmit side, the 10 Gb/s serial data stream is recovered, retimed, and passed to a laser driver. The laser driver biases and modulates a 1310 nm distributed feedback (DFB) laser, enabling data transmission over single-mode fiber through an industry-standard LC connector. On the receive side, the 10 Gb/s optical data stream is recovered from a PIN photodetector/transimpedance amplifier, retimed, and passed to an output driver. This module features a hot-pluggable XFI-compliant electrical interface. Compliance * IEEE 802.3ae standard * 10 GFC 1200-MX-SN-I standard * Class 1 Laser Safety * UL and TUV certified * Tested in accordance with Telcordia GR-468 NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com 10GBASE-LR XFP OPTICAL TRANSCEIVER 2 LR XFP Module Block Diagram VEE5 No Connect GND Transceiver GND VCC3 VCC5 VCC2 (Monitor Only) Pow er Supply Monitor and Sequence / In-Rush Control ROSA RDRD+ VCC3 CDR / Limiting Amplifier TIA SS P_DOWN/RST TX_DIS MOD_DSEL SCL SDA INTERRUPT MOD_NR RX_LOS XFI Loopback CDR Control uC RX_LOS RX_Lock Det Supply Mon Supply Control RX_Power Mon Temp Mon TX_Bias Mon TX_Power Mon Laser Fault Laser ON RESET REFCLKREFCLK+ TX_Lock Det TX_LOS VCC TOSA TDTD+ DINN DINP LDD CDR / Equalizer Monitor Diode MOD_ABS GND 10GBASE-LR XFP OPTICAL TRANSCEIVER 3 Specifications Parameter Electrical Transmit signal input differential swing Receive signal output differential swing Control I/O signals Optical Wavelength Data rate Minimum launch power into fiber (average) Maximum launch power into fiber (average) Transmitter and dispersion penalty (TDP) Optical modulation amplitude (OMA) Stressed receiver sensitivity (OMA) Maximum bit error rate at minimum receiver sensitivity Power Transceiver power Voltage Voltage tolerance Current Environmental Operating temperature, case Operating humidity Mechanical Dimensions (W x D x H) Form factor Digital Diagnostic Monitoring Base Enhance options Laser Safety US International Specification 120/820 mVp-p 340/850 mVp-p Low voltage TTL (3.3 V) 1310 nm Compliant at 10.31 Gb/s (Ethernet) and 10.52 Gb/s (Fibre Channel) -8.2 dBm 0.5 dBm 3.2 dB -5.2 dBm -10.3 dBm <10-12 2.0 W (2.5 W maximum) 3.3 V, 5.0 V 5% 375 mA (3.3 V), 150 mA (5.0 V) 0 to 75 C 8 to 80% XFP MSA compliant XFP, LC connector XFP DDM XFP DDM 21 CFR 1040.10 except for deviations pursuant to Laser Notice 50 (2001); UL approved for US and Canada IEC 60825:Am.2 (2001) and IEC 60950 (CB Scheme) Maximum Minimum Maximum Typical Typical Maximum 10GBASE-LR XFP OPTICAL TRANSCEIVER Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: JXP-01LWAA1 Product Code JXP-01LWAA1 Description 10GBASE-LR XFP Optical Transceiver Telcordia is a registered trademark of Telcordia Technologies Incorporated. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. (c)2006 JDS Uniphase Corporation. All rights reserved. 10143074 Rev. 002 03/06 10GLRXFPTC.DS.CMS.AE NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com |
Price & Availability of JXP-01LWAA1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |